--- title: "Object Properties" url: "https://help.maxon.net/c4d/en-us/Content/html/OSPLINEPROFILE-ID_OBJECTPROPERTIES.html" section_path: "Create Menu > Spline > Profile > Object Properties" element_id: "OSPLINEPROFILE" group_id: "ID_OBJECTPROPERTIES" description: "The meaning of the individual parameters can be found in the following illustrations." --- ## Object Properties ### Type Parameter ID: `PRIM_PROFILE_TYPE` Use this option to specify the type of profile. ### Height Parameter ID: `PRIM_PROFILE_A` · Range: [0..+∞m] ### b Parameter ID: `PRIM_PROFILE_B` · Range: [0..+∞m] ### s Parameter ID: `PRIM_PROFILE_S` · Range: [0..+∞m] ### t Parameter ID: `PRIM_PROFILE_T` · Range: [0..+∞m] The meaning of the individual parameters can be found in the following illustrations. ![Image: 001722.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001722.jpg)\ The parameters of the different profiles ### Plane Parameter ID: `PRIM_PLANE` Here you can define the layer on which the spline should come to rest. ![Image: 001609.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001609.jpg)\ Closed spline on the left, open spline on the right Each spline can be closed or open. If a spline is closed, the start and end points are connected. There is a difference whether you close a spline or whether you select identical start and end points. In the first case, the transition from start to end point is smooth, in the second case it is abrupt. You can close a spline automatically when you create it by clicking on the starting point at the end (the `Ctrl/Cmd` key must also be held down here). ### Interpolation Parameter ID: `SPLINEOBJECT_INTERPOLATION` ### Points Parameter ID: `SPLINEOBJECT_SUB` · Range: [0..5000] ### Angle Parameter ID: `SPLINEOBJECT_ANGLE` · Range: [0..90°] Here you set how the spline is to be subdivided during further processing. This is always important when you generate meshes with the help of generators. Depending on which type you select from the menu for **Interpolation**, you have further options. Off ![Image: 001610.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001610.jpg) This type of interpolation uses the interpolation points of the spline directly and connects them via straight lines without setting additional intermediate points. You cannot make entries in the fields for **Points** or **Angle**. Natural ![Image: 001611.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001611.jpg) This type of interpolation divides the spline in such a way that a corresponding number of **Points** are used per interpolation point. The inserted points follow the natural course of the spline directly, i.e. they are closer together at support points than in between. The curve resulting from this interpolation does not necessarily pass through the interpolation points. If a spline has several segments, the value for **Points** applies to each interpolation point of each segment. You cannot make any entries in the **Angle** field. Uniform ![Image: 001612.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001612.jpg) This interpolation type divides the spline so that the selected number of **Points** is used for each interpolation point. The points are exactly the same distance apart. The curve resulting from this interpolation does not necessarily pass through the interpolation points. If a spline has several segments, the value for **Points** applies to each interpolation point of each segment. You cannot make any entries in the **Angle** field. NoteFor the two Interpolation types **Natural** and **Uniform**, the new number of points is calculated as follows:\ Opened spline: ((Points + 1) \* (number_of_base_points - 1)) +1\ Closed spline: (Points + 1) \* number_of_base_points\ This means, for example, that an open spline with four support points and a Points value of 2 is divided into a total of ((2+1)\*(4-1))+1 = 10 points. If you close this spline, (2+1)\*4 = 12 points are used. This procedure prevents, for example, a spline from being split more roughly after it has been closed. Adaptive ![Image: 001613.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/001613.jpg) This type of interpolation always sets intermediate points if the angular deviation of the curve is greater than the value entered under **Angle**. The curve resulting from this interpolation passes exactly through the interpolation points. If a spline has several segments, the value for **Angle** applies to each segment. In contrast to the other interpolation types, different interpolations result if you change the interpolation point sequence of the spline. The subdivision, also known as **Adaptive**, produces the best results in rendering. This is therefore the default Interpolation method. You cannot make any entries in the **Points** field. Subdivided **Subdivided** is similar to the **Adaptive** type. In addition, intermediate points are inserted until the segments in between are shorter than the length defined under **Max Length**. This does not necessarily mean that the point distances correspond exactly to Max Length. Smaller values lead to higher quality, but as is so often the case, they also have the disadvantages associated with high point counts (slower redraw speed in the editor, etc.). This enables significantly better rendering quality, especially with deformed text. If you enter the same value for **Max Length** as for **Size** in the *Extrude* object (**Caps** tab, **Regular Grid** option activated), you will get fairly perfect cap areas and edges without shading errors, as the subdivisions of letters and their caps fit together and triangles do not have to be inserted **arbitrarily** to connect the two mesh elements. ![Image: 012877.jpg](https://help.maxon.net/c4d/en-us/Content/Resources/Images/012877.jpg)\ On the left **Adaptive**, on the right **Subdivided** Interpolation in combination with a Formula deformation object. Note the clearly defined edges on the right-hand side of the illustration. ### Max Length Parameter ID: `SPLINEOBJECT_MAXIMUMLENGTH` · Range: [0..+∞m] This parameter, which is only effective in **Subdivided** Interpolation mode, controls the maximum spline segment length without an intermediate point (see above for **Subdivided**) must be inserted.