Save
Saves the image or animation automatically when rendering to the Picture Viewer.
If rendered images are already located at the location at which you want to save, you will be offered the following options:
- if the images should be re-rendered and saved
- if the images should be re-rendered without saving - the images will be available temporarily in the Picture Viewer.
- if only those images that have not been rendered should be rendered and saved.
If you activate Save Selection, the selection will be set in the Preferences menu under Files / Render Output Behavior and will remain so until changed.
You can type in the entire path or you can click on Path to open a system dialog for selecting the folder
If you enter a name without a path, the picture or animation will be saved in the active scene's folder.
When using relative paths, place periods at the beginning of the path name:
- ./xy/beauty saves a file named beauty to the xy folder in the scene file's save path.
- ../xy/beauty jumps up one level in the directory - from the location at which the scene file is saved. In this example, a file named beauty will be saved in a parent folder named xy.
This works just about everywhere in Ciinema 4D where a file path can be entered (e.g., a bitmap path in a material or a sound file in a Sound Effector).
If you click this button, a dialog opens that gives you access to various codecs and their settings.
These are listed below. Depending on the format chosen, clicking on the small arrow at the left of the Format setting will make that format's options available for modification (e.g., JPEG compression or codecs for video formats). Detailed information about these formats and their settings can be found here.
Defines the bit depth per color channel. Choose either 8 bits per channel (for 24-bit color), 16 bits per channel (for 48-bit color) or 32 bits per channel (96-bit color). A list of supported color depths for each format and other details can be found here.
HDRI Formats
The standard version of Cinema 4D can output, load, and render HDR images (e.g., if you want to use HDRI textures for reflections).
This lets you take full advantage of maximum color and brightness when outputting your Cinema 4D images. Internally, Cinema 4D renders with substantially higher color and brightness (98-bit / pixel) than can be realized on a conventional RGB image.
This limitation does not exist for images rendered to the HDRI format.
The following formats are able to read this color depth:
- Radiance (HDR)
- OpenEXR
- BodyPaint 3D (rendered with 32-bit/channel)
- TIFF (rendered with 32-bit/channel)
- PSD (rendered with 32-bit/channel). These images can only be opened with Photoshop CS2.
Using applications that can work with these formats will put you at a great advantage.
So, what is all this good for?
Well, there are several uses:
-
HDR formats can be used as photo processing formats when compositing. Ordinary monitors or printers, though, cannot display this depth of color; they use conventional color depth.
One disadvantage of conventional color depths is the limitation in brightness. For example, an RGB value of 255, 255, 255 for the color white is as good as it gets. Let's say you want to darken an image in post-production that contains a white area, e.g., a surface brightly lit by sunlight through a window. The white area will turn gray, even though the actual color of the surface should start showing through.
Above, the original image; center, the original image darkened in Photoshop output as TIFF; below, the original image output in 32-bit, darkened using the appropriate software.
As you can see in the example above, the HDR image can be darkened (e.g., using Cinema 4D's Exposure setting) without having to worry about the white surface turning gray, as is the case with the conventional image formats. The above scene was lit exclusively per GI with a very bright light (400%).The depiction of HDR images is only an interpretation of color data that cannot actually be depicted with conventional technology.
When you render an image in HDR in the Picture Viewer or in the editor view, a special HDR antialiasing mode will be used. At first glance, the image will look flawed. This is due to the fact that the display of the image must be reduced to the limited color range of your monitor. If rendered using a conventional format, the image will be perfectly antialiased since antialiasing takes effect when the color depth is reduced to 8-bit or 16-bit. 32-bit antialiasing is rendered without color limitations, i.e., a smoothed pixel can have a brightness value greater than 100% and will therefore be depicted as white. Correct 32-bit antialiasing will not be visible but it's there, internally. -
HDR image formats (in particular the HDR formats: HDR (Radiance) and OpenEXR) can be used to render particularly sharp reflections. Simply lay the HDR image in a Sky object's Luminance material channel, for example. Cinema 4D will take into account the high level of brightness when rendering.
- HDR image formats (in particular the HDR formats: HDR (Radiance) and OpenEXR) are good for use as so-called Image Based Lighting, i.e., the lighting of scenes via GI, exclusively with textures, without the use of light sources.
The classic HDR formats
Both of the classic (whereby the term classic is relative in the fast-moving IT world) HDR formats, Radiance (HDR) and OpenEXR, that are used in numerous rendering pipelines, are now supported by Cinema 4D.
Radiance HDR is the older of the two formats and will most likely eventually be replaced by OpenEXR. Even though OpenEXR exhibits less dynamic breadth compared to HDR (Radiance) (which is basically irrelevant in everyday use, otherwise OpenEXR would not be used in so many Hollywood productions), it can be compressed to a much smaller file size.
Radiance (HDR)
HDR lets you save in a special 32-bit per pixel mode. Radiance HDR possesses vast dynamic breadth, much greater than in nature. This is why HDR files are often very large. Nevertheless, most HDR texture libraries are available in the Radiance (HDR) format.
OpenEXR
This format was developed by ILM (Industrial Light & Magic) and can be compressed to a high degree, despite its wide dynamic breadth.
With the introduction of Cinema 4D R13 files with multiple channels are also supported. Contrary to real Multi-Pass files that contain multiple layers that are overlain via mix modes, OpenEXR only recognizes channels without mix modes (creating actual layers from these channels must be done using a compositing application). Nevertheless, Cinema 4D will attempt to create layers based on channel names upon import.
Clicking on Options will make several save options available:
Instead of overwhelming you with technical details we will give you a general description. The compression methods available either cause a lot of loss, cause color information to be lost or are loss-free (the first 5 in the list below) and maintain the entire dynamic scope.
Especially images that need major or frequent editing, 16-bit float comma compression should not be used because it can quickly lead to imprecise or limited color ranges.
Which compression method is best for your particular purpose should be ascertained by conducting tests to determine the most acceptable correlation between quality, file size and speed of editing.
Many editing programs accept picture sequences. However, they tend to use different naming conventions.
Some programs expect the filename to end with a number, others an extension. Some programs can cope only with three-digit numbers.
Use this menu to set the sequential numbering and/or lettering style required by your editor. In the example names below, 0000 represents any sequential number, TIF represents any three-letter extension.
Name0000.TIF and example result: Test1234.jpg,
Name0000 and example result: Test1234,
Name.0000 and example result: Test.1234,
Name000.TIF and example result: Test123.TGA
Name000 and example result: Test123,
Name.000 and example result: Test.123.
With this setting you can define which color profile should be embedded in the image/texture. In versions prior to R12, Cinema 4D automatically saved using the sRGB color profile. This can now be set to any color profile desired. However, you should only make changes to this setting if absolutely necessary.
Note that many programs cannot read color profiles (for example, Windows 7 can only partially read color profiles).
When using Linear Workflow in conjunction with Multi-Passes we recommend that you render with at least 16-bit color depth. If this is not possible, disable the Linear Workflow option to restore the normal Cinema 4D R12 properties (reason: Multi-Passes are saved with a linear profile.
More information regarding color management can be found here.
Generally speaking, the default sRGB profile will be the correct profile.
Clicking the button at the right will make the following menu items available for selection:
Color Management Disabled
No color profile will be embedded (will be read in accordance with the Project Settings or bitmap shader settings when the file is opened).
Load/Save
Here you can load a color profile or save an existing one. These files have the extension *.icc. If an image is loaded here, its color profile will be assumed.
Load From Monitor
You can use monitor(hardware) profiles. However, this is not recommended since your monitor’s color profile will almost never match that of another monitor.
sRGB
Saves the image with sRGB color profile.
Linear
Saves the image in a linear color profile.
If you enable this option, a pre-multiplied alpha channel will be calculated during rendering.
The alpha channel is a grayscale image of the same resolution as your color picture. Pixels in the alpha channel are either black or white. A white pixel in the alpha channel indicates the presence of an object at that position in the image while a black pixel indicates no object.
You can use the alpha channel for compositing in video programs. For example, suppose you have scanned a photograph of an airfield and you want to render an aircraft and place it on the runway. Render the aircraft with an alpha channel in Cinema 4D, then use that alpha channel in your compositing program to cut out the non-aircraft parts of the render so that the airfield shows though. The edges of the alpha channel picture are antialiased to ensure a soft transition in the composited picture.
Pre-multiplied alphas have one particular shortcoming, illustrated below.
From left to right: the rendered image, the alpha channel, the result.
In the illustration, the alpha channel causes a dark seam. This is because both the picture and the alpha channel were rendered with antialiasing. By definition, the color picture and the alpha channel must be multiplied and so the black is calculated twice. You can avoid this dark seam by using the Straight Alpha option instead. Note that straight alphas are suitable for compositing only; they are unusable as conventional pictures.
Example: A material with an alpha mask was used to create a hole in a plane that lies with in a large sphere that is used for the background. The rendered result is pictured at the left of the image below. Let's say you now want to output the scene as an alpha channel in which only the plane with the hole is included. To do so, assign a Compositing tag to the background (i.e. the sphere). :To do so, disable the options Seen by Camera aand Seen by Transparency, so you can create the alpha channel shown on the right.
In order to generate the alpha channel shown at right, both options mentioned above must be disabled in the Compositing tag.The reason for this lies in the optimization of the renderer, which now calculates flat transparent surfaces (including alpha masks) using the raytracer. The raytracer must explicitly be told by the Compositing tag that the background behind transparent objects should not be visible.
If you have enabled Separate Alpha or if you have chosen a different picture format, the alpha channel is saved separately to the color picture. These files are indicated by an A_ before the filename, e.g., A_room.tif. Separate alphas are saved in the TIFF format.
The alpha channel can be integrated into a movie only if alpha channels are supported by the chosen codec.
You can use this option if straight alphas are supported by your compositing program to avoid the dark seam associated with pre-multiplied alphas. Note that straight alphas are suitable for compositing only; they are unusable as conventional pictures.
From left to right: the rendered image, the alpha channel, the result.
Alpha channels are usually integrated into alpha-capable image formats — that is, they are saved as part of the image file. However, if you want to save the alpha channel as a separate file, enable this option. In addition to your color picture (e.g., room.tif), you will also have a file containing the alpha channel (e.g., A_room.tif).
Separate alpha channel files will be saved in the same image format as the rendered image (Format).
Dithering is a process that adds a random pattern to colors to prevent color banding. Although dithering enhances the image quality, it also increases file size. For web graphics in particular, you may want to disable dithering to reduce image file size.
If one of the video formats above is selected, Sound will be used to integrate a sound file into the video.
This option is only relevant if the OCIO color management is activated in the Project Settings menu and you want the selected display transform to be baked into the image. This will cause you to lose the advantages of the as a rule larger float comma color space, which is, for example, offered by the ACES render space. If you want to save the image as it is displayed on the monitor you can activate this option. However, if you are planning on processing the rendering in post-production or want to archive it as loss-free as possible, this option should remain disabled in order to take complete advantage of the color management system. For this, it's also recommended that you save the image in OpenEXR format using the OCIO color management system.
More information about working with the OCIO color management system can be found on these pages.
Multi-pass rendering makes it easy for you to post-edit your renders in compositing software such as Adobe After Effects, Photoshop and Combustion. With Multi-Pass you can split the Cinema 4D rendering into separate layers such as shadows, reflections, highlights and each separate light source. You can save the layers in RLA, RPF, Photoshop (PSD) and BodyPaint 3D (B3D) format.
This button is greyed out unless the format chosen has extra options. Click Options to access these.
This path defines where the rendered still or animation will be saved. Note for animations in particular that a location is selected that offers enough disk space for the entire animation.
See also File above regarding file names and paths.
Details about these format and their settings can be found here.
Sets the channel depth to 8, 16 or 32 bits.
If this option is enabled, all layers are saved in a multi-layer file. In addition, you must set Format on the Output page to Photoshop (PSD), BodyPaint 3D (B3D) or TIFF. If the option is disabled, Cinema 4D creates a separate file for each pass using the Format setting on the Save page. A suffix is added to each of the filenames to differentiate them.
If your chosen format does not support multi-layers, each layer will be saved as a separate file. If this option is enabled, the name of the layer, such as _diffuse or _refraction, is added after the filenames.
If this option is enabled, the Multi-Pass names that you defined (double-click on the Multi-Pass name to rename it) will be used instead of the default Multi-Pass names.
This option is only available if you have activated the Alpha Channel option. Whether or not you activate Straight Alpha does not play a role.
With the Straight (Unmultiply Alpha) (Multi-Pass tab) option you define whether or not the corresponding Multi-Passes should be pre-multiplied with reference to the alpha channel that is saved.
A compositing project file is made up of multiple layers. Each layer can be edited separately.
Cinema 4D supports the following video compositing programs:
- Adobe After Effects (CS3 or higher): Multi-Pass files, camera data, lights and Null Objects (see also After Effects with regard to the various exchange possibilities).
- The Foundry Nuke (tested for v 6.3 and higher): Multi-Pass files. Camera data, lights, objects via separate FBX file.
-
Apple Final Cut Pro (4.0 or higher; Cinema 4D Mac version only): Multi-Pass files.
-
Apple Motion Version 3: Multi-Pass files, camera data, lights and objects as NULL objects.
- Appke Shake Versions 3.5 and 4: Multi-Pass files.
- eyeon's Digital Fusion from V5.0: Multi-Pass files.
Cinema 4D can render various Multi-Passes and save them as separate files (bitmaps or videos). The passes can then be loaded into one of the compositing packages listed above. In the compositing package, you can then edit the passes separately and apply a wealth of effects to them.
Other compositing applications can open the file without plugins.
You can also export Cinema 4D's camera and lights, including animation, and edit them in After Effects or Combustion.
The following camera data is supported:
- Camera position.
- Camera orientation.
- Focal length.
-
Camera to target distance (provided the Cinema 4D scene used a target camera).
The following types of light are supported: - Point.
- Parallel.
- Spot.
Exporting the Multi-Passes
To export the Multi-Passes from Cinema 4D:
-
In the Render SettingsRender Setting, on the Multi-Pass page, use the Channels drop-down list to choose which passes should be rendered. Disable the Multi-Layer File option (each pass must be saved as a separate file) in the Save tab.
Set Format to the desired file format, such as QuickTime Movie.
Set Path to the path where the passes should be saved. -
Make sure that the Save option in the Multi-Pass sub-menu is enabled and choose your compositing application. Render the image or animation. Select the same save path as in the Regular Image sub-menu so the compositing file lands in the same directory as all related files.
If Relative is enabled (Save page), the start and end time of the Cinema 4D animation will also be transferred (with After Effects, version CS3 or higher is required for this functionality). Otherwise, the animations will always begin at frame 0 in the compositing program.
If you create a compositing file for Nuke, it will not contain 3D information for cameras, lights or objects. If this option is enabled, this information can be extracted from a FBX file. A separate FBX file will then be written.
Pressing the Save Project File... button lets you create a compositing file without having to render the entire scene. However, this only makes sense if all passes have already been rendered. For example, if you have already rendered a complete animation using Team Render, including all Multi-Passes, you can press this button to generate the correct compositing file. - Import the compositing file put out by Cinema 4D into your compositing application.
To import the Multi-Passes into your compositing package:
After Effects
In After Effects, import the .aec file (File / Import / File).
For After Effects you must copy the following plug-in (located in the Cinema 4D program directory in the Exchange Plugins/aftereffects/importer folder; select the one that corresponds to your operating system and After Effects version) into the After Effects plug-in directory (if this does not exist, use the Effect folder):
- PC: C4Dimporter.aex
- macOS: C4Dimporter.plugin (may have to be unzipped first)
Other compositing applications can load the data without a plug-in.
Additional functionality:
- Shadow density assigned to light sources will also be exported (animated)
-
The "render status" in the Object Manager will be taken into consideration. In the following example, only Object 2 will be exported:
- All existing cameras will be exported (if not disabled by the render status described above)
- XRefs are supported (i.e., will be exported)
- Logical naming of lights and directories in After Effects
-
See also here
- Stereoscopy is supported: numerous stereoscopic channels and Multi-Passes (see also Stereoscopy) will be loaded into After Effects in the correct combination and clearly named.
-
The Stage object will be evaluated with regard to cameras.
See After Effects for more information about the connectivity of After Effects and Cinema 4D.
- Color, shadow density, angle and intensity animations of light sources are supported
- Unicode is supported.
Motion
Nuke
Open the corresponding *.nk-file:
Final Cut Pro
In Final Cut Pro, import the .xml file (File / Import / XML) and ignore the alert that appears.
The project in Final Cut Pro.
Digital Fusion
Use the Open command to open the *.comp file exported from Cinema 4D.
If you have set Marker in the Timeline, these will be included in the compositing file, including their names.
Use this setting to define whether cameras, lights or objects should be exported. Objects other than lights and cameras will be exported as Null Objects if an Cineware tag has been assigned to them (see below).
Let's say your scene contains two animated cameras. The first camera is animated from frame 20 to frame 50, the second from frame 2 to frame 117. The Relative setting would be used to decide between which frames the animation should run in the compositing application: Between 20 and 50 or 2 and 117 (Relative active) or between 0 and 30 and 0 and 115 (Relative not active, animation begins at frame 0). Of course this setting is not restricted to animated cameras.
Define whether or not compositing files should be saved (this does not work when rendering via Team Render).
Select your target compositing application. Cinema 4D will automatically output the compositing files in the correct format.
Lets you create compositing files without having to render the entire scene. However, this only makes sense if you have already rendered all passes.
If you have already rendered a large animation, incl. Multi-Passes, using Team Render, clicking this button will create the corresponding compositing file.
Note, however, that the renderer must still be started in the background, which can take quite a while when using the Physical Renderer. You can work around this by using the Standard Renderer, which requires a much shorter preparation time.
General Information
Compositing programs import compositions with no further ado as long as Cinema 4D and the compositing program are located on the same computer. Otherwise the compositing file and all files linked must lie in the same directory (applies to After Effects) or the images/videos must be replaced manually in the compositing program.
Limitations
- NET cannot write the compositing project file. For network rendering, generate the project file manually by clicking the Save button on the Save page of the render settings. You can save the project file at any time — even before you have rendered the passes. Missing passes are represented by stand-in frames in After Effects, which you can replace at any stage.