PostFX

Table Of Contents


Overview

Maximum PostFX


PostFX consists of several post processing features available as optional effects in the Redshift Render View. These can range anywhere from broad image tweaks like saturation and colors curves to adding visual effects like light blooms, flares, and streaks. All of these features give you great flexibility at previewing what your final rendered image could look like after final composite. 

This page covers the legacy arrangement used with the Redshift Camera Tag, these parameters have been re-arranged to accommodate for the changes made to the native Redshift Camera, please see the Redshift Camera Object page for current organization.


LUT

LUTs (Look-Up Tables) apply a color transform to your render. A LUT file changes the RGB information in your render to a new range of colors to match a certain look as defined inside a LUT file. 

Redshift supports .cube and .3dl LUT file formats and comes with 125 free LUTs.


Adjusting the strength of a LUT


LUT Parameters

LUT Location

The LUT location determines which folder the LUT files will be loaded from.


LUT File

This dropdown menu lets you select which LUT is applied.


Convert to log space before applying LUT

When enabled your rendered image will be converted to a logarithmic color space before the LUT is applied.


Apply color management before LUT

When enabled your Color Management options will be applied to the rendered image before the LUT is applied.


LUT Strength

The LUT strength controls how heavily the color transform is applied. A value of 0 means no color changes occur.


LUT Strength: 0

LUT File: Fuji Neopan (Black & White)

0.5

1


Color Controls

The Color Controls PostFX section lets you make overall color and brightness adjustments to your rendered image. 


Adjusting RGB curve


Color Controls Parameters

Exposure

Here you can increase or decrease your exposure.


Exposure: 0

1

-1


Contrast

Here you can increase or decrease your contrast.


Contrast: 0

0.2

-0.2


RGB Curves

The RGB curves feature allows you to easily tweak the brightness of your image on either all color channels or the red, green, and blue channels individually.


Color Curves: Neutral

Red channel strong adjustment

Green / Blue subtle adjustment


Photographic Exposure

Photographic Exposure lets you control the look of your image using the same kind of familiar camera controls that you are used to like ISO, f-stop, and shutter speed. Here you can also add a vignette, tonemap, and adjust the saturation of your image.

Using Photographic Exposure is important when working with certain features of the renderer such as IES lights and the physical sun/sky. The reason is that these features can generate very high light intensities. For a more in-depth look please see the Photographic Exposure page.


Toggling Photographic Exposure and adding a vignette


Photographic Exposure Parameters

Film Speed (ISO)

Film Speed controls the sensitivity of the film. Higher ISOs mean the film is more sensitive and will capture more light in a short amount of time.

Film Speed (ISO): 100

10

200


Shutter Time Ratio

Shutter Time Ratio controls how long the shutter stays open. A value of 30 means 1/30, i.e. a 30th of a second. The smaller the value, the longer the shutter stays open and the brighter the image and vice-versa.


Shutter Time Ratio: 100

10

200


f-Stop

f-Stop is a divider of the aperture of the camera (the hole through which light come onto the film). If the aperture of the camera is 1.0, an f-Stop of 2.0 means 1.0/2.0. An f-Stop of 16.0 means 1.0/16.0. So the larger the f-Stop value the smaller the aperture. and less light enters the camera and lands on the film, so the image is brighter. The larger the f-Stop, the dimmer the image.


f-Stop: 8

1

22


Whitepoint

Whitepoint controls what is considered "white" in the image. The color you choose for "Whitepoint" is the color that will be removed from the image. So if your image is slightly reddish you should make "Whitepoint" a bit red (for example [1.0, 0.9, 0.9]) in order to remove the red tint.


Whitepoint R / G / B: 1.0 / 1.0 / 1.0

0.2 / 1.0 / 1.0

1.0 / 1.0 / 0.2


Vignetting

Not supported with fisheye, orthographic, spherical, or cylindrical camera projection.

Vignetting controls the darkening around the edges of the image, simulating imperfections in real world lenses. The higher the Vignetting value, the more darkening there will be around the edges of the image.


Vignetting: 0

200

1000


Allow Desaturation

When enabled Allow Desaturation desaturates the highlights of your image once they reach a certain threshold. This desaturation effect simulates what happens in real world cameras/film.

In the image below you can see this effect most notably on the Redshift Logo, bread in the toaster, and the pink highlight on the top front of the toaster.


Allow Desaturation: Enabled

Disabled


Allowed Overexposure

Allow Overexposure controls what happens to high-intensity pixel values. It works by 'squashing' the high intensities into lower intensities in order to preserve fidelity that would normally be washed out white because of these high intensities. A value of 0.0 means that lights have to be extremely bright in order for the final pixels to approach the pure white (1.0, 1.0, 1.0) display color. Larger 'allowed overexposure' values are less aggressive and leave the original intensities more unaffected.


Allowed Overexposure: 0.100

0.0

1.0


Black Crush

Black Crush controls what happens in the dimmer parts of the image. It effectively squashes the darker colors in order to provide more contrast for images that have too much ambient lighting.


Black Crush Threshold

Black Crush Threshold controls at which parts of the input intensity range the crushing should happen. Low numbers mean 'only crush very dark intensities' while higher values allow more of the input intensity range to be black-crushed.


Black Crush Threshold: 0.250

Black Crush Amount: 0.2

0.0

1.0


Black Crush Amount

Black Crush Amount controls how much of the Black Crush effect should be applied. A value of 0.0 means 'no crushing'with a value of 1.0 means 'maximum crushing.'


Black Crush Amount: 0.0

Black Crush Threshold: 0.250

0.1


1.0



Saturation

This controls the color saturation. The lower this value, the more grayscale the image. The neutral value is 1.0. If you set it to values higher than 1.0, the colors will appear more saturated.


Saturation: 1.0

0.0

2.0


Bloom

The Bloom post effect creates a light bloom effect from highlights in your image.


Adjusting Bloom Threshold


Bloom Parameters

Bloom Threshold

Bloom Threshold determines the minimum pixel value required for a light bloom to occur from highlights in your rendered image. The lower this value the more light blooms are likely to occur. 


Bloom Threshold: 13

3

50


Bloom Softness

Bloom Softness controls how soft the light blooms appear. Higher values result in larger more soft light blooms while lower values result in smaller / tighter light blooms.


Bloom Softness: 0

0.3

1


Bloom Tint

By default the light bloom color is dependent on the color of the highlight itself but you can customize the bloom color further by tinting it yourself with the Bloom Tint color swatches.

There are 5 color swatches available for bloom tinting with the left most swatch tinting the smallest bloom radius all the way over to the right most swatch tinting the largest bloom radius allowing you to have multi-colored light blooms.


Bloom Tint: All White

All Red

All Blue


Bloom Tint element separation & settings


Bloom Intensity

Bloom Intensity controls how strong the light bloom effect is applied.


Bloom Intensity: 0.0

1

4


Flare

The Flare post effect creates a lens flare effect from the highlights in your image.


Adjusting Flare Size


Flare Parameters

Flare Threshold

Flare Threshold determines the minimum pixel value required for a lens flare to occur from highlights in your rendered image. The lower this value the more lens flares are likely to occur.


Flare Threshold: 13

2

40


Flare Softness

Flare Softness controls how soft the lens flares appear. Higher values result in more blurry lens flares while lower values result in sharper lens flares.


Flare Softness: 0

0.5

1


Flare Chromatic

Flare Chromatic adds a chromatic aberration effect to the lens flares. Higher values result in more chromatic aberration while lower values result in little to no chromatic aberration.


Flare Chromatic: 0

5

10


Flare Size

Flare Size controls how large the flares appear. Higher values result in larger flares while lower values result in smaller flares.


Flare Size: 0

0.5

1


Flare Halo

Flare Halo controls if strong enough highlights create a lens flare halo type effect. Higher values create larger halo sizes. 


Keep in mind that the flare's halo color is dependent on the color of the highlight creating the flare.


Flare Halo: 0

0.3

0.5


Flare Tint

By default the lens flare color is dependent on the color of the highlight itself but you can customize the flare color further by tinting it yourself with the Flare Tint color swatches. Flare tint does not affect the color of the Flare Halo.


Flare Tint doesn't have to be used to change the color of the lens flare, it can also be used to control the intensity of each flare element by controlling their value with each color swatch.


Flare Tint: All White

All Red

All Green



Flare Tint element separation & settings

(The white flare is the flare halo)


Flare Intensity

Flare Intensity controls how strong the lens flare effect is applied.


Flare Intensity: 0

0.5

1


Streak

The Streak post effect creates light streaks from highlights in your image.


Adjusting Streak Angle


Streak Parameters

Streak Threshold

Streak Threshold determines the minimum pixel value required for a streak to occur from highlights in your rendered image. The lower this value the more streaks are likely to occur.


When the Streak effect is used with a low threshold it can create an effect very similar to the Bloom post effect with barely distinguishable streaks on low value highlights. This can be seen in the example image below when set to 5.


Streak Threshold: 13

2

50


Streak Tail

Streak Tail controls how long the streaks are. Higher values result in longer streaks while lower values result in shorter streaks. Brighter highlights will have longer streaks than darker highlights.


Streak Tail: 0.25

0.5

1


Streak Softness

Streak Softness controls how soft the streaks appear. Higher values result in more blurry streaks while lower values result in very sharp streaks.


Streak Softness: 0

0.3

0.8


Streak Number

Streak Number controls how many streaks are created from each highlight.


Streak Number: 1

2

5


Streak Angle

Streak Angle controls how the streaks are angled. 


Streak Angle: 0

45

90


Streak Intensity

Streak Intensity controls how strong the streak effect is applied. 


Streak Intensity: 0.4

1

4